Anthony Tool & Die Full Service Precision Plastic Molds, New England Tool & Die Manufacturer

REQUEST FOR QUOTE

Contact Information:
*Denotes required fields.
*First & Last Name:
Company Name:
Title:	*Email:
*Phone:	FAX:
*Address 1:
Address 2:
*City:	State Zip

Product Information:
Available CAD Drawings (IGES, DWG, CADL, Parasolid) ATTACH FILE HERE Upon form submission your file will be sent to us as an email attachment. If your file is very large you will need to wait until the transfer process is complete. If you experience problems please send your file to info@anthonytool.com
Required Delivery Date:	Drawing No.
Plastic Material:
Shrinkage Factor:
Press Data:
Make:	Shot Size:
Tie Bar Spacing:	Platen Size:
Maximum Opening:
Maximum Mold Size:	LxWxH Number of Cavities
Mold to be tested by:	Anthony Tool Molder
Number of Sample Parts:
Plastic material supplied by:	Anothony Tool Molder

Required Engineering:

Product Drawings

Full Engineered Drawings

Layout Drawings

Cad Files

Other:

Process:

Thermoplastic Injection
Thermoplastic Injection Compression
Thermoset Compression
Blow Mold
Injection Blow
Thermoset Transfer

Other:

Product Cycle:

10,000 50,000 250,000 1,000,000
Other:

Mold Class:

SPI 101 SPI 102 SPI 103 SPI 104 View SPI Specifications
Prototype Unit Die
Other:

Method Of Fill:

Cold Runner Insulated Runner Modified Insulated Runner
Hot Runner Edge Gated Sub Gated
Direct Sprue Hot Sprue Valve Gated Hot Sprue
Valve Gated Hot Runner Parting Line Injection
Other:

Ejection:

Standard Knock Out Pins
Threaded Knock Out Thread Size Thread Pattern
Guided Ejection Spring Return Stripper Plate Double Knock Out
Stationary Side Ejection Accelerated Ejection Hydraulic Ejection
Spring Loaded Floating Plate Ejector Blades Air Valves
Stripper Rings Sleeve Pins Lifter Bar Positive Ejector Returns
Other:

Side Actions Activated By:

Ange Pin Ejector Pin Cam Air Cylinder Hydraulic Cylinder
Other:

Mold Materials:

Mold Base:
Cavity Inserts: Heat Treated
Core Inserts: Heat Treated
Special Inserts: Heat Treated
Plating:

Mold Finish:

Cores:
Cavites:
Texturing
Special Engraving: Raised on part Sunk into part
EDM Finish (RMS):
Other:

Venting:

Parting Line Core Pins Sintered Pins Ejectors Runner
Other:

Mold Temperature Control:

Heated Cartridge Heaters Thermocouples Insulator Sheets
Drilled Lines Thread Size Quick Disconnect Counterbored
Baffles Bubbler Tubes Thermal Pins Cooled Sprue Bushing
Cooling Side Actions Core Pins
Other:

Special Features:

Taper Parting Line Locks Bars Cones
Straight Side Locks Between A and B Plates
X Type Side Locks Between A and B Plates and Stripper
Date Code Inserts Recycling Inserts Mold Base Plating
Cycle Counter Bronze Plated Bushings Self-Lubricating Bushings
Replaceable Wear Plates
Other:

Spare Parts:
	Cavities	QTY
	Core	QTY
	Inserts	QTY
	Core Pins	QTY
	Ejector Pins	QTY
	Ejector Sleeves	QTY
	Ejector Blades	QTY
	Other:	QTY

Instructions:

SPECIAL INSTRUCTIONS OR COMMENTS

CAPTCHA Image
Reload Image
Please enter the corresponding from the image above into the box below.

site by pixel

Content on this page requires a newer version of Adobe Flash Player.

REQUEST FOR QUOTE